Power factor correction, explained
If you're billed in kVA, poor power factor could be adding to your demand charge every day.
Tell us a little about your site. The team will reply within 1 business day.
Get my free savings checkBook a 15-min callor call 0433 679 324If your network bills demand in kVA, poor power factor makes your peak look bigger than it is. Correcting it can lower the charge, often for far less than a battery.
What power factor means
Motors, compressors and some lighting need extra current that doesn't do useful work. Your meter's kVA reading includes that extra current, while kW counts only the useful power. Power factor is kW divided by kVA. The closer to 1, the better.
Which tariffs it affects
| Network | Billed in kVA | Billed in kW |
|---|---|---|
| Ausgrid | EA305, EA310, EA314, EA315, EA365, EA370, EA390 | EA251, EA256, EA302 |
| Endeavour Energy | N19, N20, N29, N39 | N92, N93 |
| Essential Energy | BLND1AB, BLND3AO, BLND3TO | None |
If your tariff bills kW, power factor correction won't lower this charge. Find your code in our network tariff guide.
What it can be worth
| Before | After | |
|---|---|---|
| Peak load | 300 kW | 300 kW |
| Power factor | 0.85 | 0.97 |
| Billed peak | 352.9 kVA | 309.3 kVA |
43.7 kVA x 57.80c x 365 days$9,211 a yearGross network saving for an illustrative site, before equipment and installation. Your result depends on your power factor during the peak window.
Your options
| Option | Suits | Watch for |
|---|---|---|
| Capacitor bank | Steady motor loads | Can react badly with harmonics |
| Detuned capacitor bank | Sites with drives and other electronic loads | Needs a harmonic check to size it |
| Active filter | Fast-changing loads or high harmonics | Usually the dearest option |
| Battery inverter | Sites already adding a battery | Must be set up for reactive power |
Measure first
A bill shows the result, not the cause. We log power factor and harmonics at the main switchboard through your peak hours so the equipment is sized to the real load. See our on-site energy audits.
On Ausgrid, ask for a capacity reset
Ausgrid's capacity charge looks back 12 months, so a saving can be slow to appear. Ausgrid names power factor correction as a reason it will consider a reset. Customers can request one reset a year, through their retailer, with evidence of the work.
Find out if it's worth doing on your site
Send us what you have. We'll tell you whether it's worth doing, marginal or not worth it.
- Your latest billPower and gas if you have both. A photo is fine.
- 12 months of half-hourly dataWith your sign-off, we can request it for you.
- Anything that's changingExisting solar, new equipment, EV chargers or extra shifts.
Common questions
What is a good power factor?
The closer to 1 the better. Many commercial sites aim for about 0.95 or higher, but the right target depends on your load and tariff.
How do I know if I'm billed in kVA?
Look for kVA on the demand or capacity line of your bill, or look up your network tariff code.
Will power factor correction lower my energy use?
Mostly no. Its main value is lowering a kVA demand or capacity charge and freeing up capacity on your supply.
How soon will I see the saving on Ausgrid?
It can take up to 12 months unless Ausgrid approves a capacity reset, which your retailer applies for.
See what you could save
Send a bill or a few details. You'll get a clear answer, with no obligation.
